ADAM-4118

Overview

• Type: IO Device (Analog Input)
• Connectivity: Serial (e.g., RS-485)

Channel Map

• Multiple analog input channels (e.g., voltage/thermocouple). Refer to model specs for exact count and supported sensor types.

Configuration

• Set measurement units per channel.
• Configure conversion coefficients to map physical measurements to display values.

Wiring

• Follow vendor pinout for sensor inputs and power.
• Ensure proper grounding and shielding to reduce noise.

Notes

• Keep total devices per serial bus under recommended load to maintain 1-second sampling.
• Remove unused devices to conserve bandwidth.

Troubleshooting

• Verify address/baud rate settings.
• Check sensor wiring and channel enablement.